Double acting plough overturning valve with alignment

This valve has been designed for use on cylinders for reversible ploughs to obtain the automatic oil flow reversal, and therefore the reversal of the hydraulic cylinder which rotates the plough. It has been designed to control two cylinders on plughs with the rotation of the frame upwards (see scheme).

DATA SHEET

Features

Product code
VRAP SS
Related products

V0330, V0331

Seal
BUNA N standard
Leakage
guided poppet. Negligible leakage. These valves are supplied with exchange pressure at about 150 Bar: according to your requirements, pres- sure setting can be modified by adjusting the pressure regulator
Materials
Zinc-plated steel with internal parts in hardened and ground steel
Assembly
Connect C1 to the rod side, C2 to the head side of the overturning cylinder A, U1 to the head side and U2 to the rod side of the aligning cylinder B. P and T to the machine’s suply. Thanks to its shape, it can be assembled in-line on the hydraulic cylinder or directly fixed onto the plough by the threaded hole in the valve body.
Operating instructions
the two cylinders work in parallel. Fist cylinder B starts lining up the load (as it requires less pressure). Before the end of stroke, cylinder A starts the overturning. Once the dead head point (90°) has passed, the cylinders A and B restart together taking the plugh back to its working position.
Download
product data sheet
pdf (135.83 KB)
Ask for information

Personal data*
Consenso*
Consenso
This field is for validation purposes and should be left unchanged.
Sectors
Non-stop valves for ploughs and sub soil tillers with non-stop feature Previous
Next Cetop 5 overcentre modular valve
Back to PLOUGH OVERTURNING / ALIGNMENT VALVES